Davicom ตัวควบคุม DM9000BIEPE5 10/100Mbps Mac PHY Ethernet พร้อมอินเตอร์เฟสประมวลผลทั่วไป

Processor Interface, PHY, MII

SMT

MAC PHY

Davicom

DM9000BIEPE5

Taiwan, China

Network Interface Adapter, Surveillance Camera, Embedded System, Ethernet Hub, Ethernet Switch

DM9000BI series

The DM9000BI is a fully integrated and cost-effectiveIndustrial-temperature low pin count single chip FastEthernet controller with a general processor interface,a 10/100M PHY and 4K Dword SRAM. It is designedwith low power and high performance processinterface that support 3.3V with 5V IO tolerance.The DM9000BI supports 8-bit and 16-bit datainterfaces to internal memory accesses for variousprocessors. The PHY of the DM9000BI can interface tothe UTP3, 4, 5 in 10Base-T and UTP5 in 100Base-TX withHP Auto-MDIX. It is fully compliant with the IEEE 802.3uSpec. Its auto-negotiation function will automaticallyconfigure the DM9000BI to take the maximum advantage ofits abilities. The DM9000BI also supports IEEE 802.3x full-duplex flow control

48-pin LQPF

Supports processor interface: byte/word of I/O command to internal memory data operation, Integrated 10/100M transceiver with HP Auto-MDIX, Supports back pressure mode for half-duplex, IEEE 802.3x flow control for full-duplex mode, Supports wakeup frame, link status change, and magic packet events for remote wake-up, Support 100M Fiber interface, Integrated 16K Byte SRAM, Built-in 3.3V to 1.8V regulator, Supports IP/TCP/UDP checksum generation and checking, Supports early transmit, Supports automatically load vendor ID and product ID from EEPROM, Optional EEPROM configuration, Very low power consumption mode: Power reduced mode (cable detection), Power down mode, Selectable TX drivers for 1:1 or 1.25:1 transformers for additional power reduction, Compatible with 3.3V and 5.0V tolerant I/O, DSP architecture PHY transceiver, Supports industrial temperature: -40°C ~ +85°C, 48-pin LQFP, 0.18 m process

-40~85

10/100Mbps

48-pin LQPF

Multiple of 250

40X20X12 ซม.